Solar Installer Insolvent: What to Do if Your PV System Isn't Completed Yet?

Solar Installer Insolvent: What to Do if Your PV System Isn't Completed Yet?

The solar modules are already on the roof, the inverter might already be on the wall – but the photovoltaic system isn't finished. And suddenly, the appointed solar installer is no longer reachable or has filed for insolvency. This is a particularly difficult situation for system operators. After all, it's not just about finding a new installer. First, it needs to be clarified which work has actually been completed, which components are present, what has already been paid for, and how to proceed with the existing contract.

 

Therefore, one thing is particularly important: Do not act hastily or make further payments, but first meticulously document the current status and clarify the legal situation. This article shows which steps are advisable now.

 

Note: This article provides general guidance and is not a substitute for individual legal advice. Especially with larger advance payments, disputed ownership, or high outstanding claims, expert legal advice should be sought.

1. First Clarify: Is There Actually an Insolvency?

The fact that a solar installer is no longer reachable by phone or that work on the construction site has stopped does not automatically mean that insolvency proceedings have been opened. Therefore, it should first be clarified what has actually happened. Is there an insolvency application? Has a preliminary insolvency administrator already been appointed? Have insolvency proceedings been opened? Or is the company merely in financial difficulties? This distinction is important because it determines who the right contact person is and how to deal with the existing contract.

2. Do Not Make Any Hasty Further Payments

The situation becomes particularly critical if the system is not yet completed, but a significant part of the purchase price has already been paid. Further payment requests should now be carefully reviewed. In the case of a contract for work, advance payments can generally be demanded in accordance with the value of the services already rendered and contractually owed. If services are not rendered as per contract, a reasonable part of the advance payment can be withheld under certain circumstances. Therefore, it is crucial what service has actually been rendered and what payment is contractually stipulated for it. Stopping all payments across the board is just as ill-advised as paying outstanding invoices without checking them. For larger amounts, a legal review is recommended.

3. Fully Document the Current State of the PV System

Before another installer takes over the work, the condition of the construction site should be documented as detailed as possible. For example, photograph:

  • Roof and mounted solar modules
  • Substructure
  • Cable routing and connectors
  • Inverter
  • Battery storage
  • Meter cabinet and electrical installation
  • Components already delivered but not yet installed
  • Type plates and serial numbers
  • Visible defects or unfinished work

Additionally, create a list:

 

What was ordered? What was delivered? What was installed? What is still missing?

 

This documentation can later be helpful for both a new specialist company and for clarifying claims.

4. Gather Contracts, Invoices, and Documents

In the next step, all documents related to the system should be collected. These include in particular:

  • Offer and order confirmation
  • Contract and general terms and conditions
  • Payment plan
  • Invoices and payment receipts
  • Delivery notes
  • Planning documents
  • Technical data sheets
  • Warranty documents
  • Grid connection documents
  • Correspondence with the installer
  • Any existing inspection or commissioning protocols

Also particularly important are the manufacturer and type designations of the installed components. A new specialist company will need this information to assess and complete the system.

5. Who Owns Already Delivered Components?

A frequently underestimated question concerns components that are already on the construction site. Modules, inverters, storage units, or mounting material may have already been paid for – but this does not automatically mean that the ownership situation can be legally determined in every case. Particular caution should be exercised if material is on the property but has not yet been installed.

 

Therefore, components should not be sold, returned, or installed by another company as long as it is unclear who legally owns them.

 

For valuable components or disputed ownership, this should be clarified legally.

6. Contact the Insolvency Administrator

If a preliminary or final insolvency administrator has been appointed, they become an important point of contact. For contracts not yet fully fulfilled, it may be particularly relevant whether and how the contract will be processed in the insolvency proceedings. The consumer protection agency points out that for advance or down payments already made, it cannot automatically be assumed that the agreed service will still be provided. Claims may be registered in the insolvency proceedings if applicable. Therefore, customers should precisely document their claims and payments already made.

7. Do Not Immediately Appoint a New Solar Installer

The desire is understandable: the modules are on the roof, the system is not producing electricity – so another installer should take over as quickly as possible. Nevertheless, a new order should not be placed hastily. First, it should be clarified:

  1. How is the existing contract to be legally classified?
  2. Which services have already been rendered?
  3. What defects exist?
  4. Which components are available?
  5. Who owns these components?
  6. What work is still missing?

Only then should a new specialist company assess the system.

8. Have the System Checked by a New Specialist Company

Before continuing construction, the new installer should not simply pick up where the previous one left off. A technical inventory is advisable first. This should include checking, for example:

  • Is the substructure professionally installed?
  • Are the modules correctly fastened?
  • Are cables and connectors professionally laid?
  • Has the equipotential bonding been correctly performed?
  • Is the inverter correctly dimensioned and connected?
  • Is the storage unit correctly integrated?
  • Does the electrical installation meet the requirements?
  • What work is missing until commissioning?

Subsequently, the new specialist company should document as clearly as possible which existing services can be taken over and which work needs to be corrected or newly performed. This protects both sides.

Find a New Photovoltaic Installer

Especially with an already started system, it is not always easy to find a specialist company that will take over the work of another company. In the SecondSol Business Directory, you can specifically search for companies and experts in the photovoltaic industry and contact them directly. When making your inquiry, it is best to immediately point out that the system has already been partially erected and that you are looking for a specialist company for inventory and completion.

→ Find an installer in the SecondSol Business Directory now

9. Caution with Acceptance

Acceptance is of considerable legal importance in contracts for work. Therefore, an unfinished or visibly defective system should not be hastily accepted as complete and free of defects. If defects are found, they should be documented in writing. In complex or disputed cases, it may be advisable to involve an independent expert.

10. Don't Forget Grid Operator and Registration

With an unfinished system, not only technical work but also administrative steps are often missing. For example, it needs to be checked:

  • Has the grid connection procedure been carried out?
  • Is the grid operator's approval or processing available?
  • Has a necessary meter change been initiated?
  • Is there a commissioning protocol?
  • Has the system already been registered in the market master data register?

The Federal Network Agency points out that a renewable energy system must be registered in the market master data register within one month of its commissioning. This is often done by the installer. If the installer fails, the system operator should therefore check whether the registration has actually taken place.

11. What Happens to Warranty and Manufacturer's Guarantee?

With a half-finished system, different claims can coexist. A distinction must be made in particular between:

Warranty claims against the original contracting party

and

Voluntary guarantees from component manufacturers.

An installer's insolvency does not automatically mean that a manufacturer's guarantee for solar modules, inverters, or storage units disappears. The decisive factors are the respective guarantee conditions and the guarantor named therein. Therefore, invoices, serial numbers, and guarantee documents should definitely be kept.

12. Checklist: Solar Installer Insolvent and System Unfinished – What Now?

If your installer fails while your photovoltaic system is still being built, you can follow this sequence:

  1. Check the company's insolvency status.
  2. Do not make any unverified further payments.
  3. Document the construction site and progress photographically.
  4. Gather contracts, invoices, and payment receipts.
  5. Record existing components and serial numbers.
  6. Clarify ownership of uninstalled material.
  7. Contact the insolvency administrator.
  8. Have the contractual situation reviewed.
  9. Have a technical inventory carried out by a specialist company.
  10. Obtain an offer for completion or defect rectification.
  11. Check grid connection and administrative steps.
  12. Secure manufacturer and warranty documents.

How Do I Find an Installer to Complete My PV System?

An insolvency during system construction does not necessarily mean that the photovoltaic system will remain a permanent construction site. With good documentation, a qualified specialist company can first determine which work has already been professionally carried out and which steps are still necessary for completion. Since taking over an already started system can involve additional inspection effort for the new company, you should openly describe the situation in your initial inquiry. Via the SecondSol Business Directory, you can search for photovoltaic companies and directly contact potential specialist companies. It is helpful to provide the requested company with the following information immediately:

  • System location
  • Size of the photovoltaic system
  • Current construction progress
  • Outstanding work
  • Available documents and documentation
  • If applicable, photos of the current state

This allows the specialist company to quickly assess whether they can inspect the system and take over its completion.

→ Search for a photovoltaic installer in the SecondSol Business Directory now

Conclusion: First Document, Then Continue Building

An insolvency during the construction of a photovoltaic system is annoying – but it does not necessarily mean that the system cannot be completed. The correct sequence is crucial:

 

Document → Clarify contract and payment situation → Technical inventory → Appoint a new specialist company → Complete and properly commission the system.

 

The better the previous construction status and the outstanding work are documented, the easier it will be for a new specialist company to assess whether and under what conditions they can take over the system.

 

Are you looking for a new photovoltaic specialist company? In the SecondSol Business Directory, you can search for suitable companies and contact them directly.

→ Find a new installer now

 

Is Your System Already Finished and Commissioned?

Then a different question arises: Who will handle maintenance, repairs, and warranty cases in the future?

 

→ Read more: Solar installer insolvent – what to do if the PV system is already in operation?

FAQ

What happens to my PV system if the installer is insolvent?

Insolvency does not automatically mean the system is lost. For an unfinished system, the contract, payments, and construction progress should first be documented, and then the further processing clarified.

Can another solar installer complete my PV system?

Generally, another specialist company can take over the completion. Beforehand, the existing condition should be technically and, if necessary, legally clarified and documented.

How do I find a new installer for an unfinished PV system?

Via the SecondSol Business Directory, you can search for photovoltaic companies and contact suitable specialist companies. When making your inquiry, directly state that it is an already started system that needs to be inspected and completed.

Should I still pay outstanding invoices?

Outstanding claims should not be ignored across the board, but also not paid without verification. The contract, construction progress, and the services actually rendered are decisive.

What happens to advance payments already made?

Whether and to what extent money can be reclaimed depends on the individual case and the insolvency proceedings. Claims may need to be registered in the insolvency schedule.

What happens to the manufacturer's warranty for my solar modules?

Manufacturer warranties can exist independently of the installer. The warranty conditions and the guarantor named therein are decisive.

Who registers the photovoltaic system in the market master data register?

Often, the installer handles this. Responsible system operators should check whether the registration has taken place after the installer's failure. An EE system must generally be registered within one month of its commissioning.